Tel: +86-731-84874716
facebookyoutubegooglelinkedin

How to deal with reducing atmospheres such as H2 and CO discharged from microwave tube furnaces and microwave atmosphere furnaces?

Author: langfeng Time: 2020-08-21

How to deal with reducing atmospheres such as H2 and CO discharged from microwave tube furnaces
 
In the application of microwave tube furnace and microwave atmosphere furnace, it is often necessary to pass
a reducing atmosphere such as hydrogen and carbon monoxide, but it may not be completely burned during the
experiment. The remaining exhaust gas must be properly disposed of, otherwise dangerous accidents such as
explosion and poisoning may be caused. Is there a simple way to dispose of it other than recycling it with professional equipment?
 
If the amount of exhaust gas is small, you can consider installing an automatic combustion device to burn the
remaining exhaust gas. We connect the exhaust gas to a small combustion chamber, which works like a gas stove,
except that the ignition is changed to light-induced control. When the furnace starts to work, the combustion device
starts at the same time. At this time, the light in the combustion chamber is very weak. The light switch is activated
and controls the electric pulse ignition. When the exhaust gas is ignited, the light in the combustion chamber is
bright, the light switch is stopped, and the electric pulse is no longer ignited. The exhaust gas is completely burned
by continuous combustion and becomes harmless gas or water. If it goes out halfway, the light switch will control
the electric pulse ignition again, so that the purpose of automatic combustion can be achieved.
Hunan WISE Microwave Technology Co., Ltd.

LF series microwave tube furnace include: LF-1200-1, LF-1200-2, LF-1600-1, LF-1600-2, please feel free to

contact us for more details.

 
Online Message
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.